C2 Chemical Agent Detector Kit
Handheld detector used for: determining the presence or absence of chemical agents, identifying chemical agents, collecting vapor samples of unknown chemical agents for laboratory identification, identifying when it is safe to unmask for either short (1/2 hr) or long (12 hours) periods, testing for the presence or absence of chemical agents after decontamination operations.
Availability: DISCONTINUED
Magda Perfecto
+1 514 485 8324
500 Second Avenue P.O. Box 147
Lacine (Montreal), Quebec H8S 4A7 Canada
|
|
www.anachemia.com
| Manufacturer |
| Anachemia Canada, Inc. |
| Product Name |
| C2 Chemical Agent Detector Kit |
| Detection Category |
| Chemical |
| Detection Principle |
| Colorimetric; |
| Detection Method |
| Colorimetric; |
| Application |
| Gas Analysis; Emergency Response; Screening; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| Handheld detector used for: determining the presence or absence of chemical agents, identifying chemical agents, collecting vapor samples of unknown chemical agents for laboratory identification, identifying when it is safe to unmask for either short (1/2 hr) or long (12 hours) periods, testing for the presence or absence of chemical agents after decontamination operations. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 5.3 x 6/8 x 3 in (23 x 15 x 7 cm) |
| Weight |
| <1 lb.; 1 lbs (0.5 kg) |
| Transportability |
| Pocket Size |
| Operating Conditions |
| Operates in all environments |
| Consumables |
| <$1,000/year; Detector tubes, chemical reagents |
| Data Analysis Support Equipment |
| Training kits |
| Shelf Life |
| >5 years |
| Unit Cost |
| $1,217.06 |
| Tested For Chemical Agents |
| Nerve agents: GA GB,GD, VX Blood Agents: AC, CK Blister Agents: H, HN,T, CX Choking Agents: CG |
| Tested For ITF-25 TIC/TIMs |
| Hydrogen cyanide, cyanogen chloride |
| Sample Introduction |
| Liquid; Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| 1 to 5 minutes depending on operator experience |
| Response Time (Sample Application To Output) |
| >15 minutes; 20 to 25 minutes |
| Training Required |
| <1 day training |
| Training Available |
| Minimal training not required but is available |
| Manuals Available |
| Instructions are printed on each sampler/detector ticket pouch. A detailed instruction card is attached to each carrying case with waxed cord. |
