X-am 7000
Dräger X-am 7000 provides simultaneous and continuous detection of up to five gases using a combination of more than 25 available sensors. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead or infrared sensors. A flexible, gooseneck probe is used to search for leaks at e.g., flanges, shut-off devices, and valves.
Availability: Commercially Available
+1 800 437 2437
7256 South Sam Houston Parkway, Suite 100
Houston, TX 77085
USA
|
+49 451 8842
Moislinger Allee 53-77
23580 Lübeck
Germany
|
www.draeger.com
| Manufacturer |
| Dräger Safety, Inc. |
| Product Name |
| X-am 7000 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors |
| Detection Method |
| Electrochemical Detection; Photoionization Detection |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| Dräger X-am 7000 provides simultaneous and continuous detection of up to five gases using a combination of more than 25 available sensors. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead or infrared sensors. A flexible, gooseneck probe is used to search for leaks at e.g., flanges, shut-off devices, and valves. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 5.9 × 5.6 × 3 in (150 × 140 × 75 mm) |
| Weight |
| <5 Lbs.; 2.43 Lbs (1.1 kg) |
| Power Requirements |
| NiMH Battery; Alkaline Battery; NiMH: 3 Ah (9 hour operation), 6 Ah (> 20 hour operation) Alkaline: > 20 hour operation 120/240 V AC power adapter (optional) |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; Constructed of a high impact resistant composite material with radio frequency interference protection. IP67 Specs, water proof to 1 m, drop tested to 5 ft. |
| Operating Conditions |
| –20 to 40°C (–4 to 104°F); 10 to 95% RH |
| Consumables |
| <$1,000/year; Sensors and calibration kit |
| Calibration Schedule |
| Every 3 to 6 months |
| Available Accessories |
| Remote sampling probes, carrying cases, battery chargers |
| Communications Interface |
| All stored measurements are transferred to a PC via a wireless infrared interface |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| <5 years; 2 years |
| Unit Cost |
| $3,400.00 |
| Tested For ITF-25 TIC/TIMs |
| Ammonia, arsine, bromine, carbon monoxide, chlorine, diborane, fluorine, hydrogen cyanide, hydrogen selenide, hydrogen sulfide, phosphine, sulfur dioxide |
| Tested For Explosives |
| Combustible gases |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Known Interferents/Inhibitors |
| May false alarm to heavy concentrations of various smokes and engine exhausts |
| Start Up Time (From Cold Start To Sample Ready) |
| < 5 minutes |
| Response Time (Sample Application To Output) |
| <1 minute |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Audible and visual |
| Software Control |
| “Gas Vision” software available for download of data to PC |
| Training Required |
| <1 day training |
| Training Available |
| Yes, operator training CD |
| Manuals Available |
| User manuals |
| Warranties |
| Instruments have 5 year warranty Sensors have varying 2 to 5 year warranty Batteries have varying 1 to 2 year warranty |
| ITAR/EAR Export Regulations |
| No |
| IATA Shipping Restrictions |
| No |
