3ET1CO1500, 3ET1H2S100
Enabled by nanotechnology and sensor design, the low-power TTI T-series sensor with its 0.57 inch square footprint and 0.27 inch high profile provides gas detection sensor specifications in a small package. These sensors have small size and low cost but boast industry standard setting premium performance specifications and are the longest lifetime sensors in the industry.
Availability: Commercially Available
| Manufacturer |
| KWJ Engineering |
| Product Name |
| 3ET1CO1500, 3ET1H2S100 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection ; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| Enabled by nanotechnology and sensor design, the low-power TTI T-series sensor with its 0.57 inch square footprint and 0.27 inch high profile provides gas detection sensor specifications in a small package. These sensors have small size and low cost but boast industry standard setting premium performance specifications and are the longest lifetime sensors in the industry. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 0.57 x 0.57 x 0.27 in (14.5 x 14.5 x 6.86 mm) |
| Weight |
| <1 lb.; <2 grams |
| Transportability |
| Pocket Size |
| Operating Conditions |
| 20 to 50°C (operating temperature) 0 to 35°C (recommended operating temperature) 15 – 90% Relative Humidity, operating 22°C (recommended storage temperature) 50 – 65% Relative Humidity, recommended storage |
| Shelf Life |
| <1 year |
| Other Chemical Targets |
| Carbon Monoxide (3ET1CO1500), Hydrogen Sulfide (3ET1H2S100) |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| 15 minutes upon first installation afterwards < 30 seconds |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); T(90)< 30 seconds typical at 20 C |
| Alarm Capability |
| Output signal |
| Training Required |
| <1 hour training |
| Manuals Available |
| Yes – Spec sheets |
