| Tested For Chemical Agents |
| Any chemical that contains target elements will produce a response (P, HNO bond, As and/or S). All nerve, blister, and blood agents: GA, GB, GD, GF, VX, HD, HN-1, HN-2, HN-3, CX, L, HL, PD, ED, MD, AC, CK, SA, DA, DM, DC, BZ, CNS, CA, CS, CR, PS, Runcol, Precursor of OPA, Precursor of DF, EDMP |
| Tested For ITF-25 TIC/TIMs |
| Any chemical that contains target elements will produce a response (P, HNO bond, As and/or S). Carbon disulfide, hydrogen sulfide, sulfur dioxide, sulfuric acid, phosphorus trichloride, arsine, ammonia, HCN, carbonyl sulfide, chlorosulfonic acid, methanesulfonyl chloride, phosphorus oxychloride, PF5, sulfur trioxide, sulfuryl chloride, sulfuryl fluoride, arsenic trichloride, dimethyl sulfate, ethyl phosphonothioic dichloride, ethyl phosphoric dichloride, and tetraethyl pyrophosphate. |
| Other Chemical Targets |
| Any chemical that contains target elements will produce a response (P, HNO bond, As and/or S). |
| Adaptability |
| Not applicable; Elemental analysis performs on any threats containing P, S, As, HNO, within LOD limits; Elemental analysis do not use librairy |
| Sample Introduction |
| Liquid; Vapor/Gas; Solid |
| Sensitivity/Detection Limits |
| µg; ppb |
| Known Interferents/Inhibitors |
| Any chemical that contains target elements will produce a response (P, HNO bond, As and/or S). |
| Start Up Time (From Cold Start To Sample Ready) |
| 2.5 min for temperatures between 0 and 35°C (32°F to 95°F)
5 min for temperatures between 35 and 50°C (95°F to 122°F)
15min for temperatures between -32 and 0°C (-25.6°F to 32°F) |
| Response Time (Sample Application To Output) |
| Continuous (vapor, gas, aerosols) from 1 to 16 sec
Discontinuous with S4PE/ S4PF (solids, liquids) 30 sec to 1 min |
| Alarm Capability |
| Audible and Visual (Internal) |
| Software Control |
| On-board with an accessory, PC, wired or wireless with an accessory, UGV integration |
| Other Operational Parameters |
| Yes |