HazMatID

The HazMatID is a rugged, compact, self-contained FT-IR spectrometer with an integrated computer weighing 22 lbs. The unit can be operated by battery or AC power, under separate computer control or in stand-alone mode with an on-board PDA. The unit is liquid-tight and can be fully-decontaminated.

Notify me on updates of this product 

Availability: DISCONTINUED

+1 410 612 2625
2202 Lakeside Boulevard
Edgewood, MD 21040
USA
www.smithsdetection.com
Manufacturer
Smiths Detection, Inc.
Product Name
HazMatID
Detection Category
Chemical; Explosives
Detection Principle
Molecular Spectroscopy;
Detection Method
Mid-infrared Spectroscopy;
Application
Emergency Response; Bulk Analysis; Laboratory Analysis; Screening;
Equipment Type
Instrument
Product Synopsis
The HazMatID is a rugged, compact, self-contained FT-IR spectrometer with an integrated computer weighing 22 lbs. The unit can be operated by battery or AC power, under separate computer control or in stand-alone mode with an on-board PDA. The unit is liquid-tight and can be fully-decontaminated.
Availability
DISCONTINUED
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
T&E Reports and Standards
Reports: HazMatIRtechevaluationFinaldisc_132.pdf; HazMatIRtechevaluationFinaldisc_132.pdf;
Dimensions
18 x 11 x 7 in (45.7 x 30 x 17.8 cm)
Weight
<30 lbs.; 22 lbs (10 kg)
Power Requirements
Lithium Battery; AC/DC Line Power; Internal battery, 120 V AC, or cigarette lighter. Battery lasts approx. 2 hr
Noise Produced
Minimal
Transportability
Person-Portable
Ruggedness
Waterproof/Resistant; Dust; Designed for use in harsh environmental conditions. Withstands decon.
Operating Conditions
–5 to 50°C (22 to 122°F), 0 to 100% RH
Consumables
<$1,000/year; Spatulas for handling sample material.
Solvents/Reagents
No
Calibration Schedule
Yes
Suggested Routine Maintenance
Replace infrared source when signal falls below minimum level
Available Accessories
No
Data Analysis Support Equipment
Data can be exported for processing in Grams AI or other spectral data processing tools
Communications Interface
USB port, 801.22b wireless Ethernet
Expected Operational Life
Indefinitie
Shelf Life
>5 years
Unit Cost
$55,000.00
Tested For Chemical Agents
Yes
Tested For ITF-25 TIC/TIMs
Yes
Tested For Explosives
Yes
Tested For Narcotics
Yes
Other Chemical Targets
Yes
Adaptability
Yes; user can add new targets in the field
Sample Introduction
Liquid; Solid
Sensitivity/Detection Limits
Bulk; mg; g; %
Known Interferents/Inhibitors
Successful identification of an unknown is dependent on the presence of the corresponding reference spectrum in the library. Analysis of mixtures can produce erroneous search results.
Start Up Time (From Cold Start To Sample Ready)
10 to 30 minutes
Response Time (Sample Application To Output)
Continuous (<30 seconds); 20 seconds
Total Run Time
3-4 minutes
Alarm Capability
Visual
Software Control
Unit is controlled by an on-board computer with integral LCD display. Acquired data files may be transferred onto a USB Flash DISK for processing on a PC using Grams AI.
Other Operational Parameters
Generates FTIR spectra in Grams (.SPC) format. Spectra can be searched against standard FTIR reference libraries or against custom libraries created by the user.
Training Required
<1 day training
Training Available
Yes, from vendor at additional cost. Vendor training is highly recommended. Training courses routinely held at locations across the U.S. throughout the year.
Manuals Available
Yes
Reachback Service
Vendor Reachback service available
Warranties
1 year, Additional warranty can be purchased for up to 4 years
ITAR/EAR Export Regulations
No
IATA Shipping Restrictions
Yes; lithium-ion batteries
Data File Type Format
SPC
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: