2008SDH-P 15% CO2 Monitor
Designed for use with a printed circuit board (PCB), or a customer’s microprocessor board. The firmware version depends upon the specific customer interface requirements. An analog unit, the VALTRONICS Model 2008SDH-P is a CO2 sensor with digital signal processing and temperature compensation. The firmware VERSION depends upon the specific customer interface requirements. Each serial numbered sensor is individually gas calibrated and temperature compensated at the factory.
Availability: Commercially Available
| Manufacturer |
| VTI-Valtronics, Inc. |
| Product Name |
| 2008SDH-P 15% CO2 Monitor |
| Detection Category |
| Chemical |
| Detection Principle |
| Molecular Spectroscopy; |
| Detection Method |
| Non-Dispersive Infrared (NDIR); |
| Application |
| Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| Designed for use with a printed circuit board (PCB), or a customer’s microprocessor board. The firmware version depends upon the specific customer interface requirements. An analog unit, the VALTRONICS Model 2008SDH-P is a CO2 sensor with digital signal processing and temperature compensation. The firmware VERSION depends upon the specific customer interface requirements. Each serial numbered sensor is individually gas calibrated and temperature compensated at the factory. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 3.9 x 5 x 1.5 in (100 x 127 x 39 mm) |
| Weight |
| <1 lb.; < 0.5 lbs (.23 kg) |
| Power Requirements |
| AC/DC Line Power; 24 V DC @ 0.4 amp max (20.0 to 26.0 VDC absolute min/max) |
| Transportability |
| Pocket Size |
| Operating Conditions |
| Operating temperature: 0 to 50°C (32° to 122°F) Storage temperature: -40 to 70°C (-40 to 158°F) 5 – 95% RH, non-condensing |
| Consumables |
| <$1,000/year; Calibration gas, span gas, hydrophobic filter, regulator, flow meter and tubing |
| Calibration Schedule |
| Yes, gas calibration every 6 months |
| Available Accessories |
| Field calibration kits, RS-232 test board for calibration, Master/Slave jumper JP2 Slave mode, interface connector |
| Communications Interface |
| RS-232, serial data input |
| Shelf Life |
| >5 years |
| Unit Cost |
| $1,062.00 |
| Maintenance Cost |
| Minimal |
| Other Chemical Targets |
| Carbon dioxide |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; % |
| Start Up Time (From Cold Start To Sample Ready) |
| Less than 2 minutes for use and 5 minutes for accuracy |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); 8 seconds typical |
| Training Required |
| <1 day training |
| Manuals Available |
| User Manual |
| Warranties |
| 1 yr |
