600R
The 600R is a torpedo shaped water quality monitoring device. The device may have multiple probes and probes may have multiple sensors. The YSI 600R compact sondes measure multiple parameters simultaneously, including: Conductivity, pH, ORP, Depth or Level.
Availability: Commercially Available
| Manufacturer |
| YSI, Inc. |
| Product Name |
| 600R |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Sensors |
| Application |
| Water Quality; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| The 600R is a torpedo shaped water quality monitoring device. The device may have multiple probes and probes may have multiple sensors. The YSI 600R compact sondes measure multiple parameters simultaneously, including: Conductivity, pH, ORP, Depth or Level. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 1.65 x 14 in (42 x 356 mm) |
| Weight |
| <5 lbs.; 1.1 lbs. (0.5 kg) |
| Power Requirements |
| AC/DC Line Power |
| Transportability |
| Handheld |
| Ruggedness |
| None |
| Operating Conditions |
| Medium: Fresh, Sea, or Polluted water -5 to 50°C (operating temperature) -10 to 60°C (storage temperature) |
| Consumables |
| <$1,000/year; Sonde weights, calibration and buffer solution, maintenance kit, anti-fouling plugs and screen, pH sensors |
| Calibration Schedule |
| Pre and post sampling calibrations required |
| Data Analysis Support Equipment |
| Eco Watch software for Windows and Aquarius Time Series software for Windows |
| Communications Interface |
| Limited, RS-232 and SDI-12 |
| Unit Cost |
| $3,000.00 |
| Maintenance Cost |
| Minimal, mostly cleaning |
| Other Chemical Targets |
| Measures: Dissolved oxygen (polarographic), temperature, conductivity, salinity, specific conductance, pH, total dissolved solids (TDS) |
| Sample Introduction |
| Liquid |
| Sensitivity/Detection Limits |
| ppt; %; mg; 0 to 500%, 0 to 50 mg/L – dissolved oxygen 0 to 100 mS/cm – conductivity 0 to 70 ppt – salinity |
| Known Interferents/Inhibitors |
| Animals, debris, fouling, and air bubbles can interfere with measurements |
| Start Up Time (From Cold Start To Sample Ready) |
| 5 to 15 minutes, depending on test. Also allow a couple of minutes for the sonde to equilibrate in the sample |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Software Control |
| PC |
| Training Required |
| <1 day training |
| Manuals Available |
| Yes |
| Warranties |
| 2 yr warranty for sonde, 1 yr warranty for sensors |
