Eagle-2
The Eagle-2 is a handheld 6-gas monitor with an active internal sampling pump. Features include a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases; % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges. Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications, and a variety of toxic gases.
Availability: Commercially Available
| Manufacturer |
| RKI Instruments |
| Product Name |
| Eagle-2 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Photoionization Detection; Electrochemical Detection; |
| Application |
| Emergency Response; Gas Analysis; |
| Product Model Number |
| Eagle-2 |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Eagle-2 is a handheld 6-gas monitor with an active internal sampling pump. Features include a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases; % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges. Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications, and a variety of toxic gases. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 9.5 x 5.25 x 5.9 in. (24 x 13 x 15 cm) |
| Weight |
| <5 lbs.; 3.8 lbs (1.7 kg) |
| Power Requirements |
| Alkaline Battery; NiMH Battery; 4 alkaline or NiMH Size C batteries; 16 hours using alkaline, 18 hours using NiMH. |
| Noise Produced |
| 95 dB alarm |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; IP-64 approval; can operate in 2 in. of water without leakage. |
| Operating Conditions |
| -20 to 50°C (-4 to 122°F), 0 to 95% RH, non-condensing |
| Consumables |
| <$1,000/year; Calibration gases, filters, sensors |
| Calibration Schedule |
| Depends on use; weekly or monthly under normal use. |
| Suggested Routine Maintenance |
| Change batteries, sensors, and H2S filter disk as needed. See vendor website for frequency of replacement. |
| Available Accessories |
| Dilution fitting (50:50); battery charger; extension hoses |
| Data Analysis Support Equipment |
| Data logging capability with 3600 data point capacity; log time range of 10 to 300 hours |
| Communications Interface |
| IrDA or USB with IrDA adapter |
| Expected Operational Life |
| 10 years |
| Shelf Life |
| >5 years |
| Unit Cost |
| $3,200.00 |
| Maintenance Cost |
| $1,000/year (est.) for replacement sensors and calibration gases |
| Other Chemical Targets |
| Combustible gases (as %LEL), PPM methane, O2, CO, and H2S, NH3, AsH3, CL2, HCN, PH3, SO2. PID sensor: VOCs |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; %LEL |
| Start Up Time (From Cold Start To Sample Ready) |
| 1 to 2 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Audible and Visual |
| Training Required |
| <1 day training |
| Training Available |
| No |
| Manuals Available |
| Yes |
| Warranties |
| 2 years material and workmanship |
| Approved Vendors |
| Multiple |
| Data File Type Format |
| Proprietary |
