Gas sniper portable gas detector
The Gas Sniper can monitor up to six gases simultaneously. Depending on the specific gas being monitored, the Gas Sniper utilizes catalytic combustion, electrochemical cell, galvanic cell and infrared sensor technologies to detect gases within several full scale ranges.
Availability: DISCONTINUED
| Manufacturer |
| Matheson Tri Gas |
| Product Name |
| Gas sniper portable gas detector |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; Catalytic Bead Sensor; Metal Oxide Semiconductor; |
| Application |
| Gas Analysis & Air Monitoring; |
| Product Model Number |
| SNIPER |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Gas Sniper can monitor up to six gases simultaneously. Depending on the specific gas being monitored, the Gas Sniper utilizes catalytic combustion, electrochemical cell, galvanic cell and infrared sensor technologies to detect gases within several full scale ranges. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 10.5 x 5.9 x 7 in (27 x 15 x 18 cm) |
| Weight |
| <5 lbs.; 2.3 kg |
| Power Requirements |
| Alkaline Battery; NiMH Battery; 4 Alkaline or Ni-Cad Size “D” batteries (30 hours) |
| Noise Produced |
| 90 db |
| Transportability |
| Handheld |
| Ruggedness |
| Waterproof/Resistant; Casing is constructed from chemical and weather resistant RFI/EMI coated high impact polycarbonate-polyester |
| Operating Conditions |
| -10 to 40°C (14 to 104 °F), 0 to 95% RH (non-condensing) |
| Consumables |
| <$1,000/year; Sensors |
| Calibration Schedule |
| Auto-calibration |
| Suggested Routine Maintenance |
| Minimal |
| Available Accessories |
| Shoulder strap, hydrophobic probe, sampling hose, carrying case, remote alarm, data logging kit |
| Data Analysis Support Equipment |
| Sampling pump and sensing probe |
| Communications Interface |
| Serial port |
| Expected Operational Life |
| 10 years |
| Shelf Life |
| <5 years; 2 years |
| Unit Cost |
| $1,500 to $2,500 |
| Maintenance Cost |
| Minimal |
| Tested For ITF-25 TIC/TIMs |
| Ammonia, arsine, bromine, CO, CO2, diborane, fluorine, hydrazine, hydrocarbons, HBr, HCl, HCN, HF, HS, methane, NO, NO2, O3, phosphine, silane, SO2 |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; LEL |
| Known Interferents/Inhibitors |
| Some gas combinations may result in cross-interference/compatibility issues. |
| Start Up Time (From Cold Start To Sample Ready) |
| 30 seconds |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| 1 to 2 minutes |
| Alarm Capability |
| Audible and visual |
| Software Control |
| Remote |
| Training Required |
| <1 hour training |
| Training Available |
| No |
| Manuals Available |
| Instructor's manual |
| Reachback Service |
| No |
| Warranties |
| 1 year |
| ITAR/EAR Export Regulations |
| No |
| IATA Shipping Restrictions |
| No |
