AreaRAE Series

AreaRAE Pro is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic compounds, radiation and meteorological factors. Up to six 4R+ sensors for toxic and combustible gas. AreaRAE Pro offers more than 20 interchangeable sensors. Contains a 7R+ photoionization detector. Monitor VOCs in parts per billion, with built-in compensation for temperature and humidity. Optional gamma sensor available. The Plus model includes up to 7 sensor slots.

Notify me on updates of this product 

Availability: Commercially Available

Tom Kochevar
detectgas@honeywell.com
+1 877 723 2878
3775 North First Street
San Jose, CA 65134
USA
www.honeywellanalytics.com
Manufacturer
Honeywell Analytics
Product Name
AreaRAE Series
Detection Category
Chemical; Radiological/Nuclear
Detection Principle
Sensors;Scintillation Detectors;
Detection Method
Photoionization Detection; Electrochemical Detection;Scintillation Detectors;
Application
Gas Analysis; Emergency Response;
Product Model Number
AreaRAE Pro, AreaRAE Plus
Equipment Type
Instrument
Product Synopsis
AreaRAE Pro is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic compounds, radiation and meteorological factors. Up to six 4R+ sensors for toxic and combustible gas. AreaRAE Pro offers more than 20 interchangeable sensors. Contains a 7R+ photoionization detector. Monitor VOCs in parts per billion, with built-in compensation for temperature and humidity. Optional gamma sensor available. The Plus model includes up to 7 sensor slots.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
Market Entry Date
2001
User Feedback Sources
Indifferent/No user feedback
Dimensions
12.36 x 12.04 x 6.53 in (31.4 x 30.6 x 16.6 cm) with rubber boot
Weight
<30 Lbs.; 13.88 Lbs. (6.3 kg)
Power Requirements
Lithium Battery; 7.2 V / 10 Ah Li-ion battery (16 hours)
Noise Produced
108 dB
Transportability
Handheld
Ruggedness
Waterproof/Resistant; Dust; Extreme Temperatures/Humidity; Vibration/Shock; IP 65, MIL-STD-810G and 461F
Operating Conditions
-20 to 50 °C (- 4 to 122 °F)
Consumables
<$1,000/year; Sensors
Solvents/Reagents
Calibration gases
Communications Interface
USB, Wi-Fi
Expected Operational Life
Indefinite
Shelf Life
<1 year; sensor dependent
Unit Cost
$3,000.00
Tested For Chemical Agents
No
Tested For ITF-25 TIC/TIMs
Chlorine, phosphine, HCN, HF, H2S
Other Chemical Targets
NH3, CO2, HCl, O2, SO2, NO, NO2
Radiological Targets
Gamma
Number of Library Entries
20+ PID
Sample Introduction
Vapor/Gas; Radioactive Particle
Sensitivity/Detection Limits
ppb
Start Up Time (From Cold Start To Sample Ready)
< 5 minutes
Response Time (Sample Application To Output)
Continuous (<30 seconds)
Total Run Time
Continuous monitor
Alarm Capability
Audible and visual
Software Control
On-board
Training Required
<1 day training
Training Available
Yes
Manuals Available
Yes
Warranties
2 year for catalytic LEL, CO, H2S and O2 sensors, 6 months for lamp PID sensor, 1 year all other sensors, battery, and other consumable parts. Two years for 10.6eV 7R+ PID lamp
IATA Shipping Restrictions
Yes; Calibration gases are IATA regulated. Regulation is dependent on the gas. Lithium ion battery restrictions.
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: