OwlSens

The Owlsens-T uses Rapid Thermal Modulation Ion Spectrometry and a non-radioactive (non-RAD) ionization source to detect TIC and VOC vapors. Two models: T and C. Owlsens-C detects TICs and VOCs like the T model, as well as CWA and new generation threats.

Notify me on updates of this product 

Availability: Commercially Available

Mark Brennan
Executive Vice President
mark.brennan@owlstone.com
+1 203 908 4848
761 Main Avenue
Norwalk, CT 06851
USA
www.owlstoneinc.com
Manufacturer
Owlstone, Inc.
Product Name
OwlSens
Detection Category
Chemical
Detection Principle
Spectrometry;
Detection Method
Rapid Thermal Modulation Ion Spectrometry;
Application
Emergency Response;Screening;
Product Model Number
T or C
Equipment Type
Instrument
Product Synopsis
The Owlsens-T uses Rapid Thermal Modulation Ion Spectrometry and a non-radioactive (non-RAD) ionization source to detect TIC and VOC vapors. Two models: T and C. Owlsens-C detects TICs and VOCs like the T model, as well as CWA and new generation threats.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
User Feedback Sources
Hand-on with similar device
Dimensions
12 x 18 x 8 in (30 x 46 x 20 cm)
Weight
<30 lbs.; 15.8 lbs (7.2 kg)
Power Requirements
AC/DC Line Power; 13A, 120 to 240V AC, 50 to 60Hz
Noise Produced
Noteable
Transportability
Person-Portable
Ruggedness
Extreme Temperatures/Humidity
Operating Conditions
-30 to 40°C (-22 to 104°F)
Consumables
None
Suggested Routine Maintenance
Scrubbers about 3 months
Data Analysis Support Equipment
PC
Communications Interface
Ethernet
Tested For Chemical Agents
GA, GB, GD, GF, VX , HD, HN3, L, HCN, PCl3, HF
Tested For ITF-25 TIC/TIMs
Corrosive acidic gases (i.e. SO2, HCN, HF, H2S), corrosive basic gases (i.e. NH3, amines), halogens (i.e. F2, Cl2, PF3), VOCs (i.e. acrolein, ethylene oxide), halocarbons (i.e. vinyl chloride, CFCs)
Other Chemical Targets
Yes
Adaptability
Yes; user can add new targets to detector with support
Sample Introduction
Vapor/Gas;
Sensitivity/Detection Limits
ppb
Start Up Time (From Cold Start To Sample Ready)
About 5 minutes
Response Time (Sample Application To Output)
<1 minute; 15 to 60 seconds
Total Run Time
< 1 minute
Software Control
PC
Training Required
<1 day training
Training Available
Yes
Manuals Available
Yes
IATA Shipping Restrictions
No
Approved Vendors
None
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: