Oracle
The Oracle™ is a noncontacting gas identifier with ppm sensitivity that requires no consumables, and which is operable over a wide temperature range. The Oracle can detect toxic chemicals at distances up to 50 meters away.The Oracle may operate in standalone mode or may be integrated into an ASAP V multi-threat system or used in conjunction with a Research International Remote Sensor Node. With any of these installation approaches the Oracle’s output will typically be connected by a wireless link to an intermediate Monitoring Station (e.g. a vehicle) and optionally to a Headquarters monitoring and Response Station.
Availability: Commercially Available
Jon Tobelmann
jontobelmann@resrchintl.com
+1 703 625 8381
17161 Beaton Road SE
Monroe, WA 98272-1034
U.S. East Coast
www.resrchintl.com
|
|
Manufacturer |
| Research International, Inc. |
Product Name |
| Oracle |
Detection Category |
| Chemical; Explosives; |
Detection Principle |
| Molecular Spectroscopy; |
Detection Method |
| Mid-infrared Spectroscopy;Near Infrared; |
Application |
| Emergency Response;Forensics;Screening; |
Equipment Type |
| Instrument |
Product Synopsis |
| The Oracle™ is a noncontacting gas identifier with ppm sensitivity that requires no consumables, and which is operable over a wide temperature range. The Oracle can detect toxic chemicals at distances up to 50 meters away.The Oracle may operate in standalone mode or may be integrated into an ASAP V multi-threat system or used in conjunction with a Research International Remote Sensor Node. With any of these installation approaches the Oracle’s output will typically be connected by a wireless link to an intermediate Monitoring Station (e.g. a vehicle) and optionally to a Headquarters monitoring and Response Station. |
Availability |
| Commercially Available |
Technology Readiness Level (TRL) |
| 9 |
Dimensions |
| 6.7 x 7.5 x 22.4 in (17 x 19 x 57 cm) |
Weight |
| <30 lbs.; 18.5 lbs (8.4 kg) |
Power Requirements |
| AC/DC Line Power;
40-60W @100 to 240 VAC, 50-60 Hz (Detector)
25-50W @ 100 to 240 VAC, 50-60 Hz (Source) |
Transportability |
| Person-Portable |
Operating Conditions |
| Type I: 0 to 60°C (32 to 140°F)
Type E: -30 to 60°C (-22 to 140°F)
0 to 95% RH. |
Consumables |
| None |
Calibration Schedule |
| Infrequent |
Data Analysis Support Equipment |
| Microsoft Windows XP, 7, 8.
Software ASAP Sentry™ |
Communications Interface |
| RJ-45 Ethernet, USB type A |
Expected Operational Life |
| Indefinite |
Tested For Chemical Agents |
| GA, GB, GD, GF, L, VX |
Tested For ITF-25 TIC/TIMs |
| Ammonia, Chloroethane, Diborane, Ethylene Oxide, Formaldehyde, Hydrogen Bromide, Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Sulfide, Phosgene, Vinyl Chloride, Propylene, Carbonyl Sulfide, Acrylonitrile, AC, CG, SA, and many more |
Tested For Explosives |
| Amenable by technology |
Tested For Narcotics |
| Amenable by technology |
Other Chemical Targets |
| Aqueous ammonia cleaner, IsoClean, Stainless cleaner, Propane, Butane, Natural gas, Carbon Dioxide, DMMP, DIMP, Methyl Salicylate, FM-200 (h eptafluoropropane), Sulfur Hexafluoride, Alcohols and solvents, Diesel and Gasoline exhaust |
Number of Library Entries |
| > 40 gases |
Adaptability |
| Yes |
Sample Introduction |
| Vapor/Gas; |
Sensitivity/Detection Limits |
| ppm |
Response Time (Sample Application To Output) |
| Continuous (<30 seconds); < 1 second |
Total Run Time |
| 1 to 30 seconds |
Software Control |
| Remote |
Other Operational Parameters |
| Sample up to 50 meters away |
Training Required |
| <1 day training |
Training Available |
| Yes |
Manuals Available |
| Yes |
Warranties |
| Yes |