ChemProX
The ChemProX is a handheld IMS device for field use chemical detection. The device also contains a built-in simulation mode for training. Its detection network is expandable up to 10 detectors per group, and featuring a secure data transmission by radio, which is complemented and expanded by a Wi-Fi
connection.
Availability: Commercially Available
| Manufacturer |
| Environics Oy |
| Product Name |
| ChemProX |
| Detection Category |
| Chemical; Explosives; |
| Detection Principle |
| Spectrometry; |
| Detection Method |
| Ion Mobility Spectrometry; |
| Application |
| Emergency Response;Screening; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The ChemProX is a handheld IMS device for field use chemical detection. The device also contains a built-in simulation mode for training. Its detection network is expandable up to 10 detectors per group, and featuring a secure data transmission by radio, which is complemented and expanded by a Wi-Fi
connection. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Supporting Documentation |
| Docs: ChemProX_new_generation_handheld_chemical_detector.pdf; |
| Dimensions |
| 6.2 x 3.5 x 1.7 in (15.7 x 9 x 4.3 cm) |
| Weight |
| <5 Lbs.; 1.6 Lbs. (730 g) |
| Power Requirements |
| Lithium Battery; Alkaline Battery; Rechargeable Li-Ion or three AA batteries (8 hours) |
| Noise Produced |
| Adjustable up to 85 dB |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; IP67, MIL-STD-810G |
| Operating Conditions |
| -30 to 55 °C (-22 to 131 °F), 0-95% RH non-condensing |
| Consumables |
| <$1,000/year; Filters, sampling tubes |
| Solvents/Reagents |
| None |
| Calibration Schedule |
| No calibration is required, but a simple confidence check is recommended before each detection mission |
| Suggested Routine Maintenance |
| Minimal |
| Available Accessories |
| Carrying pouch, transit case, rain caps, sampling tubes, filters |
| Data Analysis Support Equipment |
| 3.5” RGB graphical LCD display and 3 operation keys |
| Communications Interface |
| Wi-Fi, Radio Data, Bluetooth, USB
Up to 10 device per group |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $21,000.00 |
| Maintenance Cost |
| None |
| Tested For Chemical Agents |
| Yes |
| Tested For ITF-25 TIC/TIMs |
| Yes |
| Tested For Explosives |
| Yes |
| Tested For Narcotics |
| Yes |
| Other Chemical Targets |
| Yes |
| Sample Introduction |
| Vapor/Gas; |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Audible, visual |
| Software Control |
| On-board |
| Other Operational Parameters |
| GPS, 1.3 LPM internal pump with continuous airflow |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| 5 year standard warranty
Extended and comprehensive warranties available |
| IATA Shipping Restrictions |
| Yes; Lithium ion battery |
