Cyanide Emergency Test Kit
The eXact® Cyanide- Emergency Kit is water quality testing alternative to dangerous and time consuming wet-chemical testing. Designed for monitoring effluents and surface waters for intentional sabotage to a water supply system, the eXact® Strip Cyanide Kit requires two minutes for cyanide colorimetric analysis.
Availability: Commercially Available
| Manufacturer |
| Industrial Test Systems, Inc. |
| Product Name |
| Cyanide Emergency Test Kit |
| Detection Category |
| Chemical |
| Detection Principle |
| Colorimetric; |
| Detection Method |
| Colorimetric; |
| Application |
| Water Quality;Emergency Response; |
| Product Model Number |
| 484020 |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The eXact® Cyanide- Emergency Kit is water quality testing alternative to dangerous and time consuming wet-chemical testing. Designed for monitoring effluents and surface waters for intentional sabotage to a water supply system, the eXact® Strip Cyanide Kit requires two minutes for cyanide colorimetric analysis. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Weight |
| <1 Lb. |
| Power Requirements |
| None |
| Noise Produced |
| Negligible |
| Transportability |
| Pocket Size |
| Ruggedness |
| None |
| Consumables |
| None |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| <5 years; 18 months |
| Tested For ITF-25 TIC/TIMs |
| Cyanide |
| Sample Introduction |
| Liquid |
| Sensitivity/Detection Limits |
| ppm; mg/L; 0.01 to 1.0ppm |
| Known Interferents/Inhibitors |
| Sulfide, aldehydes and heavy metals will cause lower results depending on the concentration of these interferences. Thiocyanate gives a positive reaction: at Potassium Thiocyanate concentrations of 5.00, 1.00, and 0.05 mg/L test read 3.00, 0.57, and 0.03 mg/L respectively. Ocean salt water will also interfere with this test. When a salt water sample was diluted 1/10 with distilled water, and spiked with Cyanide, this test recovered only 60% of the spiked Cyanide. |
| Start Up Time (From Cold Start To Sample Ready) |
| <5 minutes |
| Response Time (Sample Application To Output) |
| <5 minutes; |
| Total Run Time |
| <5 minutes |
| Alarm Capability |
| Visual |
| Training Required |
| <1 hour training |
| Training Available |
| No |
| Manuals Available |
| Instructions |
| Reachback Service |
| No |
| Warranties |
| No |
