e-Spott
The e-Spott is a ground Probing radar system designed specifically to measure the total bound layer depth of roads and other layered surfaces.
Availability: Commercially Available
| Manufacturer |
| PipeHawk |
| Product Name |
| e-Spott |
| Detection Category |
| Chemical; Biological; Radiological/Nuclear; Explosives; |
| Detection Principle |
| Imaging; |
| Detection Method |
| Radiography; |
| Application |
| Ground Penetrating Radar; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The e-Spott is a ground Probing radar system designed specifically to measure the total bound layer depth of roads and other layered surfaces. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Supporting Documentation |
| Docs: PipeHawk_e-Spott_2015 flyer.pdf; |
| Dimensions |
| 29 x 9 x 6.6 in (73.5 x 23.5 x 17 cm) |
| Weight |
| <30 Lbs.; 6.6 Lbs. (3kg) |
| Power Requirements |
| Alkaline Battery; 8 x AA Alkaline batteries |
| Transportability |
| Person-Portable |
| Ruggedness |
| None |
| Consumables |
| None |
| Communications Interface |
| SD card |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Start Up Time (From Cold Start To Sample Ready) |
| 3 to 5 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous |
| Software Control |
| On-board |
| Other Operational Parameters |
| Transmission: 600MHz to 2.5GHz |
| Antenna Power |
| 600 MHz - 2.5 GHz using bow tie array |
| Detection Depth |
| 10 m |
| Material Detection |
| Total bound layer depth of roads and other layered surfaces. |
| Radar Effective Bandwidth |
| 70 - 150 mm |
| Radar Total System Dynamic Range |
| 70 - 500mm |
| Training Required |
| <1 day training |
| Manuals Available |
| Yes |
| Approved Vendors |
| Utsi Electronics |
