Pulsar
The Pulsar is a 60 MHz proton (1H) NMR spectrometer. The permanent magnet design provides a high performance, compact and robust instrument that can fit fits on a typical chemistry workbench. A typical sample gives a good quality spectrum within a few seconds. Pulsar is suited to an applied research environment, to near-line in an industrial production area.
Availability: Commercially Available
| Manufacturer |
| Oxford Instruments |
| Product Name |
| Pulsar |
| Detection Category |
| Chemical |
| Detection Principle |
| Molecular Spectroscopy; |
| Detection Method |
| Nuclear Magnetic Resonance ; |
| Application |
| Laboratory Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Pulsar is a 60 MHz proton (1H) NMR spectrometer. The permanent magnet design provides a high performance, compact and robust instrument that can fit fits on a typical chemistry workbench. A typical sample gives a good quality spectrum within a few seconds. Pulsar is suited to an applied research environment, to near-line in an industrial production area. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 36 x 18 x 18 in (915 x 458 x 458 mm) |
| Weight |
| >50 Lbs.; 100 Lbs. (45.4 kg) |
| Power Requirements |
| AC/DC Line Power; 110 V AC |
| Noise Produced |
| Neglibible |
| Transportability |
| Mounted |
| Ruggedness |
| Indoor use only |
| Operating Conditions |
| Ambient temperatures |
| Consumables |
| <$1,000/year; solvents, NMR tubes (5mm) |
| Data Analysis Support Equipment |
| Mnova software for advanced data analysis capability |
| Communications Interface |
| USB, Ethernet |
| Unit Cost |
| $65,000.00 |
| Tested For Chemical Agents |
| Chemical agents that have protons or fluorine (1H, 19F) can be detected with same system configuration |
| Tested For ITF-25 TIC/TIMs |
| TIC/TIM that have protons or fluorine (1H, 19F) can be detected with same system configuration |
| Tested For Explosives |
| Explosives (nitro aromatics, organic peroxides) that have protons (1H) can be detected |
| Other Chemical Targets |
| Chemicals that have protons or fluorine (1H, 19F) can be detected with same system configuration |
| Sample Introduction |
| Liquid; Solid |
| Known Interferents/Inhibitors |
| Mixtures containing molecules each with protons will lead to spectra that will need some expert interpretation |
| Start Up Time (From Cold Start To Sample Ready) |
| < 1 hour |
| Response Time (Sample Application To Output) |
| >15 minutes; 10 sec – hours |
| Software Control |
| PC |
| Other Operational Parameters |
| 2 – 3 Hz resolution |
| Training Required |
| <1 day training |
| Training Available |
| Basic training at customer facility |
| Manuals Available |
| Operator’s Manual |
| Warranties |
| 15 months from delivery |
