5000
The Model 5000 is a microprocessor based, menu-driven, dissolved oxygen meter that measures dissolved oxygen, Biochemical Oxygen Demand (BOD), and temperature. A base unit operates with sensors YSI 5010 BOD Probes or YSI 5905 BOD probes with the 5011 adapter. The base unit converts the probe signal into a useful reading. The reading is displayed and stored on the unit.
Availability: Commercially Available
| Manufacturer |
| YSI, Inc. |
| Product Name |
| 5000 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Sensors |
| Application |
| Water Quality; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| The Model 5000 is a microprocessor based, menu-driven, dissolved oxygen meter that measures dissolved oxygen, Biochemical Oxygen Demand (BOD), and temperature. A base unit operates with sensors YSI 5010 BOD Probes or YSI 5905 BOD probes with the 5011 adapter. The base unit converts the probe signal into a useful reading. The reading is displayed and stored on the unit. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 9 x 9.5 x 4.4 in (229 x 242 x 112 mm) |
| Weight |
| <5 lbs.; 2.6 lbs (1.2 kg) |
| Power Requirements |
| AC/DC Line Power; Alkaline Battery; AC adapter or 4 C-size alkaline batteries |
| Transportability |
| Handheld |
| Ruggedness |
| None |
| Operating Conditions |
| 0 to 45°C (operating temperature) 10 – 90% relative humidity, non-condensing (operating) |
| Consumables |
| >$1,000/year; probes and membranes |
| Calibration Schedule |
| Yes |
| Data Analysis Support Equipment |
| The 5000 is compatible with BOD Analyst Software, using RS-232 interface |
| Communications Interface |
| RS-232 |
| Unit Cost |
| $1,300.00 |
| Maintenance Cost |
| Probe $650, membrane $56 |
| Other Chemical Targets |
| Measures Dissolved Oxygen, Temperature, Pressure |
| Sample Introduction |
| Liquid |
| Sensitivity/Detection Limits |
| ppm; %; 0.0 to 600.0% air saturation, 0.0 to 60.0 mg/L, 0 to 1500 – dissolved oxygen |
| Start Up Time (From Cold Start To Sample Ready) |
| 15 minutes |
| Response Time (Sample Application To Output) |
| <5 minutes; ~2 minutes, (allowing for equilibration of the sensor in sample) |
| Training Required |
| <1 day training |
| Manuals Available |
| Yes |
| Warranties |
| 2 year instrument, 1 year probe |
