600 OMS V2
Designed for use in fresh, sea or polluted waters, the 600 OMS V2 uses YSI sensors and utilizes a sensor configuration such as a conductivity and temperature module that fits into the sonde body.
Availability: Commercially Available
| Manufacturer |
| YSI, Inc. |
| Product Name |
| 600 OMS V2 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Sensors |
| Application |
| Water Quality; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| Designed for use in fresh, sea or polluted waters, the 600 OMS V2 uses YSI sensors and utilizes a sensor configuration such as a conductivity and temperature module that fits into the sonde body. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 1.65 x 21.3 in (4.2 x 54.1 cm) |
| Weight |
| <5 lbs.; 1.4 lbs (0.7 kg) |
| Power Requirements |
| AC/DC Line Power; Alkaline Battery; 12 V DC 4 AA Alkaline cells |
| Transportability |
| Handheld |
| Operating Conditions |
| -5 to 50°C |
| Consumables |
| <$1,000/year; Sensors, o-rings, o-ring lubricant |
| Calibration Schedule |
| Yes |
| Available Accessories |
| Field Cable, 6096 adapter with leads, data collection platform, portable computer w/com port, 6095B MS8/DB9 adapter, ROX Reliable Oxygen (YSI 6150), blue-green algae sensors (YSI 6131 phycocyanin and YSI 6132 phycoerythrin), turbidity sensor (YSI 6136) and rhodamine WT sensor (YSI 6130) |
| Data Analysis Support Equipment |
| Ecowatch Software and 650 MDS Data Logger |
| Communications Interface |
| RS-232, SDI-12 |
| Unit Cost |
| $3,000.00 |
| Other Chemical Targets |
| Measures optical dissolved oxygen, chlorophyll, blue-green algae, rhodamine, or turbidity |
| Sample Introduction |
| Liquid |
| Sensitivity/Detection Limits |
| ppt; %; mg; µg; 0 to 500%, 0 to 50 mg/L - dissolved oxygen 0 to 100 mS/cm – conductivity 0 to 70 ppt – salinity |
| Start Up Time (From Cold Start To Sample Ready) |
| 5 to 15 minutes, depending on test. Also allow a couple of minutes for the sonde to equilibrate in the sample |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Software Control |
| PC |
| Training Required |
| <1 day training |
| Manuals Available |
| Yes |
| Warranties |
| 3 year instrument, 2 year for cable and probe |
