Carbon Dioxide Gas Analyzer 410i
This analyzer utilizes advanced Non-Dispersive Infrared technology (NDIR) with optically fixed bandpass interference filters and quantum detection to analyze the concentration of CO2 in the gas stream. In addition, the expanded ambient temperature operating range provides performance over a wider range of concentrations, and offers linearity thorough all ranges.
Availability: Commercially Available
| Manufacturer |
| Thermo Fisher Scientific, Inc. |
| Product Name |
| Carbon Dioxide Gas Analyzer 410i |
| Detection Category |
| Chemical |
| Detection Principle |
| Molecular Spectroscopy; |
| Detection Method |
| Non-Dispersive Infrared (NDIR); |
| Application |
| Laboratory Analysis; |
| Product Model Number |
| 410i |
| Equipment Type |
| Instrument |
| Product Synopsis |
| This analyzer utilizes advanced Non-Dispersive Infrared technology (NDIR) with optically fixed bandpass interference filters and quantum detection to analyze the concentration of CO2 in the gas stream. In addition, the expanded ambient temperature operating range provides performance over a wider range of concentrations, and offers linearity thorough all ranges. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 23 x 16.75 x 8.62 in (58.4 x 42.5 x 21.9 cm) |
| Weight |
| <50 Lbs.; 39 Lbs. (17.7 kg) |
| Power Requirements |
| AC/DC Line Power; 110 VAC, 115 VAC, 200 to 240 VAC, +/- 10% at 275 W |
| Noise Produced |
| None |
| Transportability |
| Benchtop/Fixed |
| Ruggedness |
| Indoor use only |
| Operating Conditions |
| 5 to 45°C (41 to 113°F) |
| Consumables |
| <$1,000/year; Teflon filter |
| Solvents/Reagents |
| None |
| Calibration Schedule |
| $630 calibration (to send back to factory) |
| Suggested Routine Maintenance |
| Minimal |
| Available Accessories |
| Also available with an Oxygen Sensor Module |
| Data Analysis Support Equipment |
| Software comes with the system |
| Communications Interface |
| RS-232, RS-485, TCP/IP, 10 status relays, and power fail indication, 0-20 or 4-20 mA isolated current output (optional) |
| Shelf Life |
| >5 years |
| Unit Cost |
| $8,050.00 |
| Maintenance Cost |
| Teflon particulate filter $286 |
| Other Chemical Targets |
| Measures levels of carbon dioxide and oxygen |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| 90 minutes to 2 hours |
| Response Time (Sample Application To Output) |
| <5 minutes; 90 seconds for 90% Full scale, 30 seconds average |
| Alarm Capability |
| Yes |
| Software Control |
| Yes |
| Training Required |
| <1 week training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| Yes |
