Handheld LIBS Analyzer for Metal Alloys
The handheld LIBS (laser induced breakdown spectroscopy) analyzer, mPulse, is optimized for the rapid sorting of metal alloys. It identifies a wide variety of metal alloys at the press of the trigger and measures elements, light and heavy in only 1 second. Its point-and-shoot operation allows for the testing of large or small samples such as shavings, turnings, granules, cables etc.
Availability: DISCONTINUED
Manufacturer |
| Oxford Instruments |
Product Name |
| Handheld LIBS Analyzer for Metal Alloys |
Detection Category |
| Chemical |
Detection Principle |
| Elemental Analysis; |
Detection Method |
| Laser Induced Breakdown Spectroscopy; |
Application |
| Screening; Bulk Analysis; Forensics; |
Product Model Number |
| mPulse; mPulse+ |
Equipment Type |
| Instrument |
Product Synopsis |
| The handheld LIBS (laser induced breakdown spectroscopy) analyzer, mPulse, is optimized for the rapid sorting of metal alloys. It identifies a wide variety of metal alloys at the press of the trigger and measures elements, light and heavy in only 1 second. Its point-and-shoot operation allows for the testing of large or small samples such as shavings, turnings, granules, cables etc. |
Availability |
| DISCONTINUED |
Technology Readiness Level (TRL) |
| 9 |
User Feedback Sources |
| Indifferent/No user feedback |
Dimensions |
| 13 x 13 x 5 in (330 x 340 x 130 mm) |
Weight |
| <5 Lbs.; 4 Lbs. (1.8 kg) |
Power Requirements |
| Lithium Battery |
Noise Produced |
| Neglibible |
Transportability |
| Handheld |
Ruggedness |
| None; Optics are protected by a sapphire window to prevent contamination and damage |
Operating Conditions |
| Extreme environments |
Consumables |
| <$1,000/year; Lens cleaner; Batteries |
Solvents/Reagents |
| None |
Suggested Routine Maintenance |
| Minimal |
Communications Interface |
| USB |
Shelf Life |
| >5 years |
Unit Cost |
| $25,000 - $30,000 |
Tested For Chemical Agents |
| No |
Tested For ITF-25 TIC/TIMs |
| No |
Tested For Explosives |
| No |
Tested For Narcotics |
| No |
Other Chemical Targets |
| Elements |
Sample Introduction |
| Solid |
Sensitivity/Detection Limits |
| % |
Start Up Time (From Cold Start To Sample Ready) |
| 2 minutes |
Response Time (Sample Application To Output) |
| Continuous (<30 seconds); 1 second |
Total Run Time |
| < 5 minutes |
Alarm Capability |
| No |
Software Control |
| On-board, PC |
Other Operational Parameters |
| None |
Training Required |
| <1 day training |
Training Available |
| Operator’s Manual |